PE-LAYER

PE-Layer is an extruded, non-cross-linked EPE foam. A cost effective cellular plastic that’s often used as a one-time packaging. The material possesses good shock absorbing qualities which makes it optimal as in between sheets or pallet inlays.
The material can be melted together to form a 3D packaging solution where the material is the adhesive between the layers.
The cellular plastic is available both on rolls and as thicker planks and are extruded with a skin on both sides.
The material is available as an antistatic option which makes it optimal for packaging of electrical products such as enclosures, circuit boards and other electronics.
The antistatic material is in a pink color to tell it apart from the traditional white, grey and black.

When there is need for big volumes of packaging at a reasonable cost this material is recommended. In difference to other qualities of packaging material like styrofoam and polystyrene, this material does not fracture.
The material can be used multiple times as returnable and reusable packaging internally or between factories when the weight of the packed parts does not crush the material.
The cellular plastic is available in a wide range of densities and hardnesses, making the material suited for packaging of many different products. The PE-layer is available in low densities for cost-effectivity and a higher density for packaging of heavy parts without crushing the material.
The material is frequently used in most industries with the automotive industry being the biggest consumer with packaging solutions often called “one-way foam” or “foam blocks”.

Materials: Cellular Plastic

Temperature range:  -80°C – 100°C

Volumetric weight: 15 – 200 kg/m3

Fire resistance: FMVSS 302 and UL-94

Materials: Cellular Plastic

Temperature range:  -80°C – 100°C

Volumetric weight: 15 – 200 kg/m3

Fire resistance: FMVSS 302 and UL-94

Cellular Polyethylene (GC)

The material can be had in different densities that affects insulating properties and the softness.
GC means that the surface is coarse and the surface is usually a matter of preference.

Cellular Polyethylene (FC)

The material can be had in different densities that affects insulating properties and the softness.

Cellular Polyethylene UL94

The Firegraded cellular polyethylene is a popular choice in telecom and electronic industry.
A material we store in block form which means it can be easily split into any desired thickness.

Soft-Polyethylene

A very soft slow recovery PE-foam. That’s very suitable for sealing uneven surfaces.
Popular insulation in the ventilation industry when it does not need to rebound continuously.

PVC Foam

A soft, elastic and slow recovery foam with open cells. Well suited for sealstrips and gaskets.

Poron® - Microcellular PUR-Foam

CABSEAL has been selected by the quality focused Rogers Corporation to be a preferred converter of their high end PUR-Foam Poron.

PE-Layer

A cost-efficient insulation or packaging-material with good cushioning properties.

EPDM

Excellent aging and ozone properties.
Good acid and alkali resistance, as well as good heat and cold resistance.

Chloroprene (CR)

Good weather, ozone and oil resistance.
The allround option for gaskets, well suited for general industry environments.

Nitrile (NBR)

Excellent oil and good petrol resistance.
We store this material both flat and patterned (ribbed).

Cork, rubber bound

Rubber bound, good oil and petrol resistant cork rubber with a Nitrile (NBR) base.

SBR

Cost efficient solution, wear resistant.
Our NR/SBR material can be acquired in patterned and flat sheeting.
Typically used as floor-mats, or on shelves for protection.

Natural Rubber (PARA)

Soft, very elastic and extremely durable.
You often find this material in the toughest of environments. Such as the drilling and mining
industries.

Abrasive Rubber

Very durable material, good physical and mechanical properties.
Like natural rubber, this tough material you find in the most physically demanding industries.

Abrasive Rubber

Very durable material, good physical and mechanical properties.
Like natural rubber, this tough material you find in the most physically demanding industries.

Silicone

High temperature resistance, for both heat and cold.
Excellent aging properties.
FDA approved.

Fluorine Rubber (Viton®)

High quality and very resistant to acids, oils and solvent products.
Have a high heat tolerance.

Polyethylene, PE

Cost efficient plastic and low friction makes it well suited for example slide rails and spacers.
Could be had in black or natural colour.

Polyamide, PA (Nylon)

The material is very durable which makes it suitable for washers and spacers.
Washers made from Polyamide is also lighter and more cost efficient than most metal substitutes.

Polyesterfilm, PET (Mylar®)

Polyesterfilm has excellent electrical properties typically used as isolations in electrical enclosures.

PTFE (Teflon®)

PTFE has one of the lowest friction on solid materials. It also possess good chemical and acid resistance.

Polyurethane, PUR

A plastic material that reminds of rubber in flexibility and elasticity. Well suited in tough environments such as heavy duty machinery and drilling.

Polyester Foam

Excellent in absorbing high-frequent sounds such as screeches and machine noise.

Polyester/ether Filter (PPI)

Often used for filtrating dust, grease and coarser particles. The polyester/ether filter can be acquired in various PPI (pores/inch).

Bonded Foam

Recycled polyester/ether foam that’s been milled together with a bonding material. A cost effective solution.

O-rings

We distribute o-rings in American and European standard to be as wide as possible in our rubber assortment.

Molded Parts

We have a lot of moulded parts customized made for customers in all varieties of rubber and shapes.

Extruded Profiles

Extruded profiles is a general term that includes door seal strips, window seals, o-rings, cords and general profiled rubber.

Bitumen

Bitumen is an excellent structure-borne sound absorbent because it has a very high volume weight.

Bitumen Paper

Bitumen Paper is a firm bitumen material. Structure-borne sound absorbing is its prime feature.

Textiles / Felt

Textile or felt is generally a good option for high frequent sound absorbing purposes.
Excellent as squeak and rattle-sound dampening.

Synthetic Fiber

Synthetic fiber-material for high pressure and temperature demanding gaskets.

Contact Us

Interested in knowing more about our materials? Contact us to get more information on materials and what we can do.