Silicone

Silicone rubber is an extremely heat-resistant material with excellent aging properties and is well suited in outdoor applications such as seals in IP-classified lighting fixtures, lamps and display seals. The material is very pure and may be acquired FDA graded for food- and medical technology industry and is completely odor- and tasteless. Further examples of the purity of the silicone is that the material may be obtained with WRAS, WRC and ELL which are certifications for drinking water.
The material is fluid repellent and ozone resistant making it well suited for gaskets above the earth in outdoor application or underwater gaskets. Silicone gaskets are frequent in valves, couplings, heat pumps, fittings and water taps.
The silicone is converted by us in multiple ways. The material is die-cut, waterjet cut, molded and extruded to gaskets, seals, seal strips and extruded rubber seals and profiles.
Our silicones, also called VMQ is for short Vinyl-Methyl-Silicone is obtainable in many colors such as transparent, white, red and black. When molding silicone products there’s really no limitation of color. The silicones are available in many various hardnesses with the lowest at 20 shore to harder options of 80 shore.
The silicones temperature properties are extraordinary and withstands temperatures from -60° up to 230° degrees and are normally not flammable. The material is therefore commonly found in ovens and other high temperature products. May also be obtained with a UL94 fire grade.

Materials: EPDM, Chloroprene, Nitrile, SBR, Silicone, Viton®

Temperature range:  -60°C – 275°C

Hardness: 40 – 80 sh

Fire resistance: UL-94

Materials: EPDM, Chloroprene, Nitrile, SBR, Silicone, Viton®

Temperature range:  -60°C – 275°C

Hardness: 40 – 80 sh

Fire resistance: UL-94

Cellular Polyethylene (GC)

The material can be had in different densities that affects insulating properties and the softness.
GC means that the surface is coarse and the surface is usually a matter of preference.

Cellular Polyethylene (FC)

The material can be had in different densities that affects insulating properties and the softness.

Cellular Polyethylene UL94

The Firegraded cellular polyethylene is a popular choice in telecom and electronic industry.
A material we store in block form which means it can be easily split into any desired thickness.

Soft-Polyethylene

A very soft slow recovery PE-foam. That’s very suitable for sealing uneven surfaces.
Popular insulation in the ventilation industry when it does not need to rebound continuously.

PVC Foam

A soft, elastic and slow recovery foam with open cells. Well suited for sealstrips and gaskets.

Poron® - Microcellular PUR-Foam

CABSEAL has been selected by the quality focused Rogers Corporation to be a preferred converter of their high end PUR-Foam Poron.

PE-Layer

A cost-efficient insulation or packaging-material with good cushioning properties.

EPDM

Excellent aging and ozone properties.
Good acid and alkali resistance, as well as good heat and cold resistance.

Chloroprene (CR)

Good weather, ozone and oil resistance.
The allround option for gaskets, well suited for general industry environments.

Nitrile (NBR)

Excellent oil and good petrol resistance.
We store this material both flat and patterned (ribbed).

Cork, rubber bound

Rubber bound, good oil and petrol resistant cork rubber with a Nitrile (NBR) base.

SBR

Cost efficient solution, wear resistant.
Our NR/SBR material can be acquired in patterned and flat sheeting.
Typically used as floor-mats, or on shelves for protection.

Natural Rubber (PARA)

Soft, very elastic and extremely durable.
You often find this material in the toughest of environments. Such as the drilling and mining
industries.

Abrasive Rubber

Very durable material, good physical and mechanical properties.
Like natural rubber, this tough material you find in the most physically demanding industries.

Abrasive Rubber

Very durable material, good physical and mechanical properties.
Like natural rubber, this tough material you find in the most physically demanding industries.

Silicone

High temperature resistance, for both heat and cold.
Excellent aging properties.
FDA approved.

Fluorine Rubber (Viton®)

High quality and very resistant to acids, oils and solvent products.
Have a high heat tolerance.

Polyethylene, PE

Cost efficient plastic and low friction makes it well suited for example slide rails and spacers.
Could be had in black or natural colour.

Polyamide, PA (Nylon)

The material is very durable which makes it suitable for washers and spacers.
Washers made from Polyamide is also lighter and more cost efficient than most metal substitutes.

Polyesterfilm, PET (Mylar®)

Polyesterfilm has excellent electrical properties typically used as isolations in electrical enclosures.

PTFE (Teflon®)

PTFE has one of the lowest friction on solid materials. It also possess good chemical and acid resistance.

Polyurethane, PUR

A plastic material that reminds of rubber in flexibility and elasticity. Well suited in tough environments such as heavy duty machinery and drilling.

Polyester Foam

Excellent in absorbing high-frequent sounds such as screeches and machine noise.

Polyester/ether Filter (PPI)

Often used for filtrating dust, grease and coarser particles. The polyester/ether filter can be acquired in various PPI (pores/inch).

Bonded Foam

Recycled polyester/ether foam that’s been milled together with a bonding material. A cost effective solution.

O-rings

We distribute o-rings in American and European standard to be as wide as possible in our rubber assortment.

Molded Parts

We have a lot of moulded parts customized made for customers in all varieties of rubber and shapes.

Extruded Profiles

Extruded profiles is a general term that includes door seal strips, window seals, o-rings, cords and general profiled rubber.

Bitumen

Bitumen is an excellent structure-borne sound absorbent because it has a very high volume weight.

Bitumen Paper

Bitumen Paper is a firm bitumen material. Structure-borne sound absorbing is its prime feature.

Textiles / Felt

Textile or felt is generally a good option for high frequent sound absorbing purposes.
Excellent as squeak and rattle-sound dampening.

Synthetic Fiber

Synthetic fiber-material for high pressure and temperature demanding gaskets.

Contact Us

Interested in knowing more about our materials? Contact us to get more information on materials and what we can do.